Restoring Hipath Wireless Controller Software - Siemens HiPath C10 User Manual

FTP Server – The IP of the FTP server to where the scheduled backup will be copied
●
to.
User ID – The user ID that the controller should use when it attempts to log in to the
●
FTP server.
Password – The corresponding password for the user ID
●
Confirm – The corresponding password for the user ID to confirm it was typed
●
correctly.
Directory – The directory on the server where the image file will be stored.
●
8. To save your changes, click Save.
12.4.4

Restoring HiPath Wireless Controller software

You can restore the HiPath Wireless Controller database.
To restore the HiPath Wireless Controller software:
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. From the left pane, click Software Maintenance. The HWC Software tab appears.
3. Click the Restore tab.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Performing HiPath Wireless Controller software maintenance
Performing system maintenance
hwc_ongoing.fm
257