Viewing The Wireless Ap Availability Display; Viewing Statistics For Wireless Aps - Siemens HiPath C10 User Manual

Statistics are expressed in relation to the AP. Therefore, Packets Sent means the
>
AP has sent that data to a client and Packets Rec'd means the AP has received
packets from a client.
11.1.1

Viewing the Wireless AP availability display

When the AP Registration screen has been saved for the HiPath Wireless Controller in Paired
Mode, the Wirelss AP Availability display will show the status of both local and foreign Wireless
APs for that HiPath Wireless Controller.
In normal operations, when Availability is enabled, the local Wireless APs are green, and the
foreign Wireless APs are red. If the other HiPath Wireless Controller fails, and the foreign
Wireless APs connect to the current HiPath Wireless Controller, the display will show all
Wireless APs as green. If the Wireless APs are not attached they do not appear in the report.
11.1.2

Viewing statistics for Wireless APs

Two displays are snapshots of activity at that point in time on a selected Wireless AP:
Wired Ethernet Statistics by Wireless APs
●
Wireless Statistics by Wireless APs
●
The statistics displayed are those defined in the 802.11 MIB, in the IEEE 802.11 standard.
To view wired Ethernet statistics by wireless APs:
1. From the main menu, click Reports & Displays. The HiPath Reports & Displays screen
appears.
2. Click the Wired Ethernet Statistics by Wireless APs display option. The Wired Ethernet
Statistics by Wireless APs display appears in a new browser window.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Working with reports and displays
Viewing the displays
hwc_reports.fm
233