Table of Contents
Advertisement
If defined improperly, user exception rules may seriously compromise the systems
7
normal security enforcement rules. They may also disrupt the system's normal
operation and even prevent system functionality altogether. It is advised to only
augment the exception-filtering mechanism if absolutely necessary.
To define port exception filters:
1.
From the main menu, click Wireless Controller Configuration. The HiPath Wireless
Controller Configuration screen appears.
2.
In the left pane, click Port Exception Filters. The Port Exception Filters screen appears.
3.
Select the applicable data port from the Port drop-down list.
4.
In the IP / subnet: port box, type the destination IP address. You can also specify an IP
range, a port designation or a port range on that IP address.
5.
From the Protocol drop-down list, select the protocol you want to specify for the filter. This
list may include UDP, TCP, IPsec-ESP, IPsec-AH, ICMP. The default is N/A.
6.
Click Add. The new filter appears in the Filter area of the screen.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
Configuring the HiPath Wireless Controller
Performing the first-time setup of the HiPath Wireless Controller
hwc_startup.fm
65
Hide quick links:
Advertisement
Table of Contents
