Siemens HiPath C10 User Manual page 215

3. In the Assignment by drop-down list, click SSID.
4. To define a VNS for a third-party AP, select the Use 3rd Party AP checkbox.
5. Continue configuring your VNS as described in Section 7.1.1, "Configuring topology for a
VNS for Captive Portal", on page 125.
Bridge Traffic at AP and MAC-based authentication are not available for Third Party
>
VNSs.
Step 3 – Define authentication by captive portal for the third-party AP VNS
1. Click on the Authentication tab. In the Authentication configuration screen,
2. click the Captive Portal radio button.
3. In the Captive Portal portion of the screen, define the RADIUS Attributes and the filter IDs
to match those in RADIUS.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_3rdpartyaps.fm
Working with third-party APs
215