Siemens HiPath C10 User Manual page 91

No of Retries for Video VI – Select the number of retries for the Video
●
transmission queue. The default value is 4. The recommended rate is adaptive
(multi-rate).
No of Retries for Voice VO – Select the number of retries for the Voice
●
transmission queue. The default value is 1. The recommended rate is adaptive
(multi-rate).
No of Retries for Turbo Voice TVO – Select the number of retries for the Turbo
●
Voice transmission queue. The default value is 1. The recommended rate is
adaptive (multi-rate).
Preamble – Select a preamble value: Short, Long, or Auto.
●
Protection Mode – Select a protection mode: None, Auto, or Always. The default
●
value is Auto.
Protection Rate – Select a protection rate, in Mbps: 1, 2, 5.5, or 11. The default
●
value is 11.
Protection Type – Select a protection type: CTS or RTS CTS. The default value
●
is RTS CTS.
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_apstartup.fm
Configuring the wireless AP
Modifying wireless AP settings
91