Reset Ipsec Statistics; Sa Duration - HP FlexFabric 7900 Series Command Reference Manual

Examples
# Clear all IPsec SAs.
<Sysname> reset ipsec sa
# Clear the inbound and outbound IPsec SAs for the triplet of SPI 123, remote IP address 10.1.1.2, and
security protocol AH.
<Sysname> reset ipsec sa spi 10.1.1.2 ah 123
# Clear all IPsec SAs for the remote IP address 10.1.1.2.
<Sysname> reset ipsec sa remote 10.1.1.2
# Clear all IPsec SAs for the entry 10 of the IPsec policy policy1.
<Sysname> reset ipsec sa policy policy1 10
# Clear all IPsec SAs for the IPsec policy policy1.
<Sysname> reset ipsec sa policy policy1
Related commands
display ipsec sa

reset ipsec statistics

Use reset ipsec statistics to clear IPsec packet statistics.
Syntax
reset ipsec statistics[ tunnel-id tunnel-id ]
Views
User view
Predefined user roles
network-admin
Parameters
tunnel-id tunnel-id: Clears IPsec packet statistics for the specified IPsec tunnel. The value range for the
tunnel-id is 0 to 4294967295. If no tunnel ID is specified, the command clears all IPsec packet statistics.
Examples
# Clear IPsec packet statistics.
<Sysname> reset ipsec statistics
Related commands
display ipsec statistics

sa duration

Use sa duration to set an SA lifetime for an IPsec policy.
Use undo sa duration to remove the SA lifetime.
Syntax
sa duration { time-based seconds | traffic-based kilobytes }
undo sa duration { time-based | traffic-based }
139