Display Ipsec Proposal - HP 3600 v2 Series Command Reference Manual

Field
tunnel remote address
proposal name
inbound/outbound AH/ESP setting

display ipsec proposal

Syntax
display ipsec proposal [ proposal-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
proposal-name: Name of a proposal, a string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipsec proposal command to display information about IPsec proposals.
If you do not specify any parameters, the command displays information about all IPsec proposals.
Related commands: ipsec proposal.
Examples
# Display information about all IPsec proposals.
<Sysname> display ipsec proposal
IPsec proposal name: prop1
encapsulation mode: transport
transform: esp-new
ESP protocol: authentication md5-hmac-96, encryption des
Table 36 Output description
Field
IPsec proposal name
encapsulation mode
Description
Remote IP address of the tunnel.
Proposal referenced by the IPsec policy.
AH/ESP settings in the inbound/outbound direction, including the
SPI and keys.
Description
Name of the IPsec proposal
Encapsulation mode used by the IPsec proposal, transport or tunnel
234