Installing The Front Wheel (Front Brake Disc) - Yamaha STAR XVS95CE 2DX1 2014 Service Manual

Table of Contents

f. Repeat steps (c) through (e) several times

until all the marks come to rest at the same

g. The spot where all the marks come to rest is

the front wheel's heavy spot "X".

• Front wheel static balance

a. Install a balancing weight "1" onto the rim ex-

actly opposite the heavy spot "X".

Start with the lightest weight.

b. Turn the front wheel 90° so that the heavy

spot is positioned as shown.

c. If the heavy spot does not stay in that posi-

tion, install a heavier weight.

d. Repeat steps (b) and (c) until the front wheel

is balanced.

• Front wheel static balance

a. Turn the front wheel and make sure it stays at

each position shown.

b. If the front wheel does not remain stationary

at all of the positions, rebalance it.

INSTALLING THE FRONT WHEEL (FRONT

• Front brake disc

Front brake disc bolt

23 Nm (2.3 m·kgf, 17 ft·lbf)

• Tighten the brake disc bolts in stages and in a

crisscross pattern.

• Install the brake disc so that the chamfered

portions of the bolt holes "a" face away from

• Front brake disc

Refer to "CHECKING THE FRONT BRAKE

DISC" on page 4-28.

3. Lubricate:

• Oil seal lips

Recommended lubricant

Lithium-soap-based grease

Chapters

Table of Contents