3. Adjust:
• Front wheel static balance
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Install a balancing weight "1" onto the rim ex-
actly opposite the heavy spot "X".
TIP
Start with the lightest weight.
b. Turn the front wheel 90° so that the heavy
spot is positioned as shown.
c. If the heavy spot does not stay in that posi-
tion, install a heavier weight.
d. Repeat steps (b) and (c) until the front wheel
is balanced.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
4. Check:
• Front wheel static balance
▼
▼▼▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
a. Turn the front wheel and make sure it stays at
each position shown.
b. If the front wheel does not remain stationary
at all of the positions, rebalance it.
▲
▲▲▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
EAS22000
INSTALLING THE FRONT WHEEL (FRONT
BRAKE DISC)
▼▼▼
1. Install:
• Front brake disc
TIP
• Apply locking agent (LOCTITE®) to the
threads of the brake disc bolts.
• Tighten the brake disc bolts in stages and in a
crisscross pattern.
• Install the brake disc so that the chamfered
portions of the bolt holes "a" face away from
the hub.
LT
2. Check:
• Front brake disc
Refer to "CHECKING THE FRONT BRAKE
DISC" on page 4-39.
3. Lubricate:
• Oil seal lips
▲▲▲
▼▼▼
4. Tighten:
• Front wheel axle
• Front wheel axle pinch bolt
ECA1TP1008
NOTICE
Before tightening the wheel axle, push down
hard on the handlebar several times and
check if the front fork rebounds smoothly.
▲▲▲
4-17
FRONT WHEEL
Front brake disc bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
LOCTITE®
Recommended lubricant
Lithium-soap-based grease
Front wheel axle
59 Nm (5.9 m·kgf, 43 ft·lbf)
Front wheel axle pinch bolt
20 Nm (2.0 m·kgf, 14 ft·lbf)
a