1. Front cylinder spark plug lead
2. Fuel hose (hose joint to pressure regulator)
3. Fuel tank breather hose
4. Fuel tank bracket
5. Frame
6. Clutch cable
7. Rear right cylinder head cover
8. Wire harness
9. Canister purge hose (for California)
10. Hose holder
11. Crankcase breather hose
A. Fasten the front cylinder spark plug lead with the
holder.
B. Fasten the fuel hose (hose joint to pressure
regulator) with the holder.
C. Fasten the hose protector of the fuel tank breather
hose with the hose holder. Make sure that the fuel
tank breather hose contacts the fuel tank bracket.
D. Position the buckle of the plastic band below the
frame, and place the end of the band to the inside
of the rear cylinder head cover.
E. Be sure to fit the plastic band into the slots in the
hose holder. (Except for California)
F. Slots in the hose holder
2-56
CABLE ROUTING