Features; Outline Of The Fi System - Yamaha STAR XVS95CE 2DX1 2014 Service Manual

Xvs95ce(c)
Table of Contents

Advertisement

EAS20170

FEATURES

EAS5S71022

OUTLINE OF THE FI SYSTEM

The main function of a fuel supply system is to provide fuel to the combustion chamber at the optimum
air-fuel ratio in accordance with the engine operating conditions and the atmospheric temperature. In
the conventional carburetor system, the air-fuel ratio of the mixture that is supplied to the combustion
chamber is created by the volume of the intake air and the fuel that is metered by the jet used in the
respective carburetor.
Despite the same volume of intake air, the fuel volume requirement varies by the engine operating con-
ditions, such as acceleration, deceleration, or operating under a heavy load. Carburetors that meter the
fuel through the use of jets have been provided with various auxiliary devices, so that an optimum air-
fuel ratio can be achieved to accommodate the constant changes in the operating conditions of the en-
gine.
As the requirements for the engine to deliver more performance and cleaner exhaust gases increase,
it becomes necessary to control the air-fuel ratio in a more precise and finely tuned manner. To accom-
modate this need, this model has adopted an electronically controlled fuel injection (FI) system, in place
of the conventional carburetor system. This system can achieve an optimum air-fuel ratio required by
the engine at all times by using a microprocessor that regulates the fuel injection volume according to
the engine operating conditions detected by various sensors.
The adoption of the FI system has resulted in a highly precise fuel supply, improved engine response,
better fuel economy, and reduced exhaust emissions.
1. Intake air temperature sensor
2. Engine trouble warning light
3. Intake air pressure sensor
4. Rear cylinder ignition coil
5. Front cylinder ignition coil
6. Injectors
7. Throttle position sensor
8. Spark plug
9. Relay unit (fuel pump relay)
10. ECU (engine control unit)
11. Lean angle sensor
12. Speed sensor
13. O
sensor
2
1
2
3 4
5 6
8
17
16 15
1-2
7
8 9 10 11
14
13
12
14. ISC (idle speed control) unit
15. Crankshaft position sensor
16. Engine temperature sensor
17. Fuel pump
FEATURES

Advertisement

Table of Contents
loading

Table of Contents