Yamaha STAR XVS95CE 2DX1 2014 Service Manual page 89

1. Tail sub-wire harness
2. Tail/brake light
3. License plate light
4. Rear left turn signal light lead
5. Rear left turn signal light
6. Tail/brake light lead
7. Rear left turn signal light coupler
8. Tail/brake light coupler
9. License plate light lead
10. License plate light coupler
11. Rear right turn signal light coupler (black)
A. Route the tail sub-wire harness through the
guides, and then secure the lead by bending the
guides around the lead.
B. Align the white tape on the tail sub-wire harness
with the guide.
C. Install each coupler so that both ends of the female
section of the coupler are protruding past the
edges of the holder.
D. To the holder on the rear fender
E. To the rear left turn signal light
F. To the license plate light
G. Route the license plate light lead between the
bracket and the rear fender, making sure that the
lead is secured by the bracket.
H. To the rear right turn signal light
2-62
CABLE ROUTING