Installing The Primary Drive Gear - Yamaha STAR XVS95CE 2DX1 2014 Service Manual

EAS25230

INSTALLING THE PRIMARY DRIVE GEAR

1. Install:
• Primary drive gear "1"
• Spacer "2"
New
• Lock washer "3"
• Primary drive gear nut
Primary drive gear nut
100 Nm (10 m·kgf, 72 ft·lbf)
TIP
• Make sure that the shorter side of the primary
drive gear is facing outward.
• Align the tab "a" on the lock washer with the
groove "b" in the spacer.
• While holding the generator rotor "4" with the
sheave holder "5", tighten the primary drive
gear nut.
• Do not allow the sheave holder to touch the
projection on the generator rotor.
• Lubricate the primary drive gear nut threads
with engine oil.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
2. Bend lock washer tab along a flat side of the
nut.
New
5-58
CLUTCH