Yamaha STAR XVS95CE 2DX1 2014 Service Manual page 19

Table of Contents

Handle electrical components with special

care, and do not subject them to strong

Electrical components are very sensitive to

and can be damaged by static electricity.

Therefore, never touch the terminals and be

sure to keep the contacts clean.

When resetting the ECU by turning the main

switch to "OFF", be sure to wait approximately 5

seconds before turning the main switch back to

BASIC SERVICE INFORMATION

Checking the electrical system

Before checking the electrical system, make

sure that the battery voltage is at least 12 V.

Never insert the tester probes into the cou-

pler terminal slots. Always insert the probes

from the opposite end "a" of the coupler, tak-

ing care not to loosen or damage the leads.

For waterproof couplers, never insert the

tester probes directly into the coupler. When

performing any checks using a waterproof

coupler, use the specified test harness or a

suitable commercially available test har-

Chapters

Table of Contents