Bearings And Oil Seals; Circlips; Rubber Parts - Yamaha STAR XVS95CE 2DX1 2014 Service Manual

Table of Contents

BEARINGS AND OIL SEALS

Install bearings and oil seals so that the manu-

facturer's marks or numbers are visible. When

installing oil seals "1", lubricate the oil seal lips

with a light coat of lithium-soap-based grease.

Oil bearings liberally when installing, if appropri-

Do not spin the bearing with compressed air

because this will damage the bearing surfac-

Before reassembly, check all circlips carefully

and replace damaged or distorted circlips. Al-

ways replace piston pin clips after one use.

When installing a circlip "1", make sure the

sharp-edged corner "2" is positioned opposite

the thrust "3" that the circlip receives.

IMPORTANT INFORMATION

Check rubber parts for deterioration during in-

spection. Some of the rubber parts are sensitive

to gasoline, flammable oil, grease, etc. Do not al-

low any items other than the specified one to

contact the parts.

Table of Contents