Yamaha STAR XVS95CE 2DX1 2014 Service Manual page 87

1. Starter motor lead
2. Clutch cable
3. Brake fluid reservoir hose
4. O sensor lead
2
5. Rear brake hose
6. Rear brake light switch lead
7. Lean angle sensor
8. Rear turn signal light and license plate light sub-
wire harness coupler
9. Tail/brake light sub-wire harness coupler
10. Wire harness
11. Stator coil coupler
12. Rectifier/regulator coupler
13. Stator coil lead
14. Positive battery lead
15. Battery band
16. Battery
A. Insert the projection the stator motor lead holder
into the hole in the engine bracket (rear lower
bracket).
B. Insert the projection on the wire harness holder
into the hole in the battery box.
C. Insert the projection on the tail sub-wire harness
holder into the hole in the battery box.
D. To the wire harness
E. To the stator coil
F. Secure the holder by inserting the projection on
the holder into the hole in the frame, and then
fasten the wire harness and stator coil lead with
the holder.
G. To the sidestand switch
H. To the rectifier/regulator
I. Route the positive battery lead on top of the
battery, and then fasten the lead with the battery
band.
2-60
CABLE ROUTING