View Room Control Devices - Polycom RealPresence Immersive Studio Administrator's Manual

Data
Average Jitter (Rx)
Maximum Jitter (Tx)
Maximum Jitter (Rx)
Call Priority

View Room Control Devices

Control of the room features is built into the RealPresence Immersive Studio system, eliminating the need
for an external control system.
Procedure
1. Go to Admin Settings > Room Control Devices.
2. Select the device for which you want to see the settings.
The settings for each device are described below.
Room Device Settings
Setting
Status
IP Address
Port Number
Polycom, Inc.
Description for Individual System
Report
The average jitter of packets
received during an H.323 call,
calculated from sample tests done
once per minute.
The maximum jitter of packets
transmitted during an H.323 call,
calculated from sample tests done
once per minute.
The maximum jitter of packets
received during an H.323 call,
calculated from sample tests done
once per minute.
This function is not supported.
Description
Specifies the state of the connection. The states
are Connected, Not Connected, and Unknown.
Specifies the IP address of the device that is being
controlled.
Specifies the port number for TCPIP connection of
the device that is being controlled.
Troubleshooting
Description for Aggregated
Report
Average of the individual call
numbers.
Maximum of the individual call
numbers.
Maximum of the individual call
numbers.
75