Polycom RealPresence Immersive Studio Administrator's Manual page 12

Procedure
1. Login to the web interface of the RealPresence ITP system as admin.
2. Go to Admin Settings > Servers > Distributed Media Service.
3. Select the Enable Multipoint Server check box.
4. Configure the following settings:
Multipoint Server Settings
Setting
Virtual Meeting Room (VMR) Number
Server Address
Domain
User Name
Password
Note: The username, domain, and password in the Distributed Media Service page
should match the User Id, Domain, and password shown in the User > Users
section of the DMA admin web interface.
5. When you complete the Multipoint Server settings, press Save to save the details and perform
validation of the values entered in the text boxes.
Configuration Status
Correct
Polycom, Inc.
Validation
Success
Using a Provisioning Service
Description
Specifies the DMA conference room number/ID to
use for conferencing activities, created in step 8.
Specifies the DMA server that hosts the conference
room/VMR.
Specifies the domain of the DMA user who owns
the conference room. It should be the same as the
domain displayed in the DMA admin web interface
in User > Users in the room item for the user
created in step 7.
Specifies the User ID of the DMA user, created in
step , who owns the conference room. No special
roles (Administrator/Auditor/Provisioner) are
required for this DMA user. This user must own the
VMR (conference room) entered in VMR Number.
The user name value entered should be the same
as the User ID displayed in the DMA admin web
interface in User > Users for the user created in
step 7.
Specifies the password of the DMA user, created in
step 7, who owns the DMA conference room.
Registration Status
Field
Online
Notes
10