Using A Provisioning Service; Enable A Provisioning Service; Configure A Provisioning Service - Polycom RealPresence Immersive Studio Administrator's Manual

Using a Provisioning Service

Topics:
•

Enable a Provisioning Service

•

Configure a Provisioning Service

• Set Up the Distributed Media Service
A provisioning service prepares and equips your network to provide services to its users.
Enable a Provisioning Service
To register the RealPresence ITP system with the Polycom RealPresence Resource Manager system,
enter the registration information and attempt to register by going to Admin Settings in the RealPresence
ITP system web interface. Multiple RealPresence ITP systems can be registered to a single user.
Procedure
1. Go to Admin Settings > Servers > Provisioning Service.
2. Select the Enable Provisioning setting.
3. Enter the Domain, User Name, Password, and Server Address for automatic provisioning.
4. Select Register or Update.
The system tries to register with the Polycom RealPresence Resource Manager system using
NTLM authentication.
Configure a Provisioning Service
If automatic provisioning is enabled but the system does not register successfully with the provisioning
service, you might need to change the Domain, User Name, Password, or Server Address used for
registration. For example, users might be required to periodically reset passwords used to log into the
network from a computer. If such a network password is also used as the provisioning service password,
you must update it on the RealPresence ITP system, too.
To avoid unintentionally locking a user out of network access in this case, RealPresence ITP systems will
not automatically retry registration until you update the settings and register manually on the Provisioning
Service page.
Procedure
1. Go to Admin Settings > Servers > Provisioning Service.
2. Configure these settings.
Provisioning Service Settings
Setting
Domain
Polycom, Inc.
Description
Specifies the domain for registering to the
provisioning service.
7