Polycom RealPresence Immersive Studio Administrator's Manual page 18

Procedure
1. Go to Admin Settings > General Settings > Date and Time > System Time.
2. Configure these settings.
System Time Settings
Setting
Date Format
Time Format
Auto Adjust for Daylight Saving Time
Time Zone
Time Server
Primary Time Server Address
Secondary Time Server Address
Current DateCurrent Time
Polycom, Inc.
Configuring General System Settings
Description
Specifies how the date is displayed in the interface.
Specifies how the time is displayed in the interface.
Specifies the daylight saving time setting. When
you enable this setting, the system clock
automatically changes for daylight saving time.
Specifies the time difference between Greenwich
Mean Time (GMT) and your location.
Specifies whether the connection to a time server is
automatic or manual for system time settings. You
can also select Off to enter the date and time
yourself.
Specifies the address of the primary and optional
secondary time servers to use when Time Server
is set to Manual.
The system uses the secondary time server if the
primary time server does not respond.
If Time Server is set to Off, these settings are
configurable.
16