Polycom RealPresence Immersive Studio Administrator's Manual page 26

Setting
Registrar Server
Proxy Server
Registrar Server Type
For more information about interoperability considerations for Polycom and Microsoft, refer to the
Polycom Unified Communications for Microsoft Environments Solution Deployment Guide.
Polycom, Inc.
Configuring Network Settings
Description
Specifies the IP address or DNS name of the SIP
Registrar Server.
• In a Microsoft Lync Server 2013 or
Skype for Business Server 2015
environment, specify the IP address or
DNS name of the Lync Server server.
• If registering a remote RealPresence
Immersive Studio with an Office
Communications Server Edge Server or
Lync Server Edge Server, use the fully
qualified domain name of the access
edge server role.
By default for TCP, the SIP signaling is sent to port
5060 on the registrar server. By default for TLS, the
SIP signaling is sent to port 5061 on the registrar
server.
Enter the IP address and port using the following
format:
<IP_Address>:<Port>
<IP_Address> can be an IPv4 address or a DNS
hostname such as
servername.company.com:6050
Hostnames can resolve to IPv4 addresses.
Syntax Examples:
• To use the default port for the protocol
you have selected:
10.11.12.13
• To specify a different TCP or UDP port:
10.11.12.13:5071
Specifies the DNS name or IP address of the SIP
Proxy Server. If you leave this field blank, the
Registrar Server is used. If you leave both the SIP
Registrar Server and Proxy Server fields blank, no
Proxy Server is used.
By default for TCP, the SIP signaling is sent to port
5060 on the proxy server. By default for TLS, the
SIP signaling is sent to port 5061 on the proxy
server.
The syntax used for this field is the same as for the
Registrar Server field.
If the registering server is Lync, select Microsoft.
Otherwise, select Unknown.
.
24