Configure The Distributed Media Service - Polycom RealPresence Immersive Studio Administrator's Manual

The Add Conference Template window appears.
b) Name the template and configure the rest of the settings as required.
The resolution, video quality, line rate, etc that is applied to the conference depends on the
configuration in the conference template.
7. Configure a DMA user:
a) In the menu, go to User > Users and press Add on the ACTIONS pane to add a user.
The Add User window appears.
b) Configure the userid and password.
You can also configure the class of service and bit rate. No special roles (Administrator/
Auditor,Provisioner) are required for this DMA user.
8. Create a conference room:
a) Select the user that you created in step 7 and press Manage conference rooms on the
ACTIONS pane.
The Conference Rooms window appears.
b) Add a conference room by pressing Add.
The Add Conference Room window opens.
c) Provide or generate a Room id (conference room number).
Enable the conference template and select the conference template that was created in
step 6.
d) Enable MCU pool order and select the MCU pool order that was created in step 5.
9. Verify the above configuration by dialing in to the conference room created above from the
RealPresence ITP endpoint by dialing the dial-in number of the conference room.
If the codec enters the conference, then the configuration is correct.
These instructions do not cover all configuration items related to setting up a conference room in DMA.
Refer to the DMA documentation for detailed instructions on setting up MCUs, pools, conference
templates, etc.

Configure the Distributed Media Service

By default, the RealPresence ITP system supports the Polycom RealPresence Distributed Media
Application ™ (DMA). RealPresence DMA enables multipoint conferences. Refer to the DMA
documentation for detailed instructions on setting up the service, including MCUs, pools, conference
templates, etc.
Keep the following in mind:
• All the endpoints (conference initiator and conference participants) should be registered to DMA as
H323 and/or SIP endpoints. This may not be required of the conference participants if you are using
only an IP address to perform blast dialing.
• The DMA must have the RealPresence API license installed in it to use the meeting composer
feature. This can be checked in Admin > Local Cluster > Licenses > Active License. If the
Licensed capabilities field shows RealPresence Platform API, then the license is installed.
• There should be an MLA registered to the RMX for applying the proper layouts.
To use the Meeting Composer functionality in RealPresence Immersive Studio, RealPresence Immersive
Studio Flex, or RealPresence OTX Studio, you must enable and configure Distributed Media Service.
Polycom, Inc.
Using a Provisioning Service
9