Immersive Settings; Room Control Devices - Polycom RealPresence Immersive Studio Administrator's Manual

Immersive Settings

Immersive settings include the IP address of the secondary codecs in the RealPresence Immersive
Studio setup.

Room Control Devices

Control of the room features is built into the RealPresence ITP system, eliminating the need for an
external control system.
Procedure
1. Go to Admin Settings > Room Control Devices.
2. Select the device for which you want to see the settings.
The settings for each device are described below.
Room Device Settings
Setting
Status
IP Address
Port Number
Polycom, Inc.
Configuring Network Settings
Description
Specifies the state of the connection. The states
are Connected, Not Connected, and Unknown.
Specifies the IP address of the device that is being
controlled.
Specifies the port number for TCPIP connection of
the device that is being controlled.
30