Monitor A Room Or Call; View The Sessions List - Polycom RealPresence Immersive Studio Administrator's Manual

connects to LDAP directory services, the RealPresence ITP system is the client and the LDAP directory
server is the server.
Procedure
1. Go to Admin Settings > Security > Certificates > Certificate Options.
2. Configure these settings on the Certificates screen and click Save.
Setting
Maximum Peer Certificate Chain Depth
Always Validate Peer Certificates from Browser
Always Validate Peer Certificates from Server

Monitor a Room or Call

The remote monitoring feature enables administrators to view the room where the system is installed.
Camera controls and presets are not supported in this release of RealPresence ITP .
Procedure
» Go to Utilities > Tools > Remote Monitoring.

View the Sessions List

You can use the sessions list to see information about everyone logged in to a RealPresence Immersive
Studio system including:
• Type of connection, for example, Web
• User ID associated with the session, typically Admin or User
• Remote IP address, the addresses of people logged in to the system from their computers
Procedure
» Go to Diagnostics > System > Sessions.
Polycom, Inc.
Description
Specifies how many links a certificate chain can
have. The term peer certificate refers to any
certificate sent by the far-end host to the
RealPresence ITP system when a network
connection is being established between the two
systems.
Not supported.
Controls whether the RealPresence ITP system
requires the remote server to present a valid
certificate when connecting to it for services such
as those listed for client-type CSRs in Certificate
Signing Requests (CSRs) (provisioning, directory,
SIP, and so forth).
Securing the System
43