View The Security Profile; Low Security Profile Definition - Polycom RealPresence Immersive Studio Administrator's Manual

View the Security Profile

This release of the RealPresence ITP system supports the Low security profile. You can customize some
of the settings within this security profile as needed.
Procedure
1. Go to Admin Settings > Security > Global Security.
2. Select the Low (default) security profile.
The Low security profile configures the system with no mandated security controls, although you
can enable all controls as needed.
3. Select Next.
4. Follow the prompts in the Security Profile Change wizard.

Low Security Profile Definition

The Low Security Profile is supported on the RealPresence ITP system. The following table shows the
default values for specific Admin settings.
Low Security Profile Settings
Admin Settings Area
General Settings
System Settings
Network
IP Network
Polycom, Inc.
Auto Answer Point to Point Video
Auto Answer Multipoint Video
Call Detail Report
Enable Recent Calls
Pairing
SmartPairing Mode
Enable SIP
Transport Protocol
Securing the System
Low
Default
Range Value
Checkbox Disabled
Checkbox Disabled
Checkbox Enabled
Checkbox Enabled
DisabledAu Disabled
tomatic
Manual
Checkbox Enabled
AutoTLS Auto
TCP UDP
Configura
ble
Yes
Yes
Yes
Yes
Yes
Yes
Yes
44