Configure Local Access - Polycom RealPresence Immersive Studio Administrator's Manual

Encryption Settings
Setting
Require AES Encryption for Calls
AES Encryption in Local Interface
Require FIPS 140 Cryptography

Configure Local Access

You can configure local access so that users can reach a RealPresence ITP system through the local
interface.
Procedure
1. Go to Admin Settings > Security > Local Accounts > Login Credentials.
2. Configure the following settings for each system in your RealPresence ITP setup.
Login Credentials
Setting
Admin ID
Polycom, Inc.
Description
Specifies how to encrypt calls with other sites that
support AES encryption.
• Off—AES Encryption is disabled.
• When Available—AES Encryption is
used with any endpoint that supports it,
even if the other endpoints in the call do
not support it.
• Required for Video Calls Only—AES
Encryption is used for all video
endpoints in the call. Video endpoints
must support AES Encryption to
participate in the call.
• Required for All Calls—AES
Encryption is used for all video
endpoints in the call. All endpoints must
support AES Encryption to participate in
the call.
Enables the exclusive use of the FIPS 140-2-
validated software cryptography module for
cryptographic functions. Also disables all "weak"
protocols and ciphers, including:
• SSLv2
• SSLv3
• Non-FIPS 140-2 approved TPS cipher
suites
Description
Specifies the ID for the administrator account. The
default Admin ID is admin.
Admin IDs are not case sensitive.
Securing the System
40