Configure The Skype For Business Directory Server - Polycom RealPresence Immersive Studio Administrator's Manual

Directory Servers Supported by Polycom RealPresence Resource Manager Provisioning
Directory Servers
Supported
LDAP by a Polycom
RealPresence Resource
Manager system
Microsoft Lync Server
2013 and Skype for
Business Server 2015
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
▪ +Country Code.Area Code.Number
▪ +Country Code.(National Direct Dial Prefix).Area Code.Number

Configure the Skype for Business Directory Server

To all your users to search the directory servers to add contacts, you must set up and configure the
Microsoft directory servers in the RealPresence ITP system web interface.
Procedure
1. Go to Admin Settings > Network > IP > SIP Settings.
2. Configure the SIP settings as described in SIP Settings.
3. Go to Admin Settings > Servers > Directory Servers and select Microsoft for the Server Type.
4. Configure these settings.
Microsoft Directory Server Settings
Setting
Registration Status
Domain Name
Domain User Name
User Name
Polycom, Inc.
Authentication Protocol
NTLM v2 only
NTLM v1 only
Global Directory Groups
Pre-defined groups from
the LDAP directory are
shown in Polycom
RealPresence ITP
system's directory
Contact groups but not
distribution lists
Description
Specifies whether the system is successfully
registered with the Microsoft Lync Server.
Specifies the Domain Name entered on the SIP
Settings screen.
Specifies the Domain User Name entered on the
SIP Settings screen.
Specifies the User Name entered on the SIP
Settings screen.
Configuring Network Settings
Entry Calling
Information
Might include:
▪ H.323 dialed
digits, H.323 ID,
or H.323
extension
▪ Phone number *
▪ SIP address
Might include SIP
address (SIP URI)
29