Installing A Secondary Gpu Riser And Cable Option - HPE ProLiant DL360 User Manual

9. Install the expansion board.
10. Connect any required internal or external cables to the expansion board.
11. Install the access panel (Installing the access panel on page 25).
12. Install the server in the rack.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server (Powering up the server on page 24).

Installing a secondary GPU riser and cable option

Prerequisites
When installing a 3/4-length GPU, a low profile type -a controller must be installed.
Before installing this option, do the following:
• Be sure that the power supplies support the installation of this option. For more information, see the
Hewlett Packard Enterprise Configurator website.
• Be sure you have the following items:
80 Installing a secondary GPU riser and cable option