Processor And Heatsink Options; Installing A Processor Heatsink Assembly - HPE ProLiant DL360 User Manual

9. Install the access panel (Installing the access panel on page 25).
10. Install the server in the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server (Powering up the server on page 24).

Processor and heatsink options

Installing a processor heatsink assembly

The server supports single-processor and dual processor operations.
Prerequisites
Before installing this option, be sure you have the following items:
• Processor or heatsink kit contents
• T-30 Torx screwdriver
Procedure
1. Observe the following alerts.
CAUTION:
When handling the heatsink, always hold it along the top and bottom of the fins. Holding it from the
sides can damage the fins.
CAUTION:
To prevent possible server malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
Processor and heatsink options 89