Hardware Options Installation; Hewlett Packard Enterprise Product Quickspecs; Installing The Nvme Drives - HPE ProLiant DL360 User Manual

Hardware options installation

Hewlett Packard Enterprise product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the website.

Installing the NVMe drives

NVMe drives are supported in 8 SFF and 10 SFF server configurations when the 10 SFF SAS/SATA/NVMe
Combo backplane option or the 2 SFF NVMe backplane option is installed. When either backplane is
installed, NVMe drives are required in bays 9 and 10. For more information, see Device numbers on page
18.
Prerequisites
NVMe drives are supported in the 8SFF and 10 SFF server configurations.
Before installing this option, be sure you have the following:
The components included with the hardware option kit
Procedure
1. Observe the following alert:
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
2. Remove the drive blank, if installed.
3. Press the Do Not Remove button to open the release handle.
4. Install the drives.
Hardware options installation 39