b. Connect the Smart Storage battery cable to the extender cable.
c. Install the center fan baffle.
8.
Install the access panel (Installing the access panel on page 25).
9.
Install the server in the rack.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server (Powering up the server on page 24).
HPE Trusted Platform Module 2.0 Gen10 Option
Overview
Use these instructions to install and enable an HPE TPM 2.0 Gen10 Kit in a supported server. This option is
not supported on Gen9 and earlier servers.
This procedure includes three sections:
HPE Trusted Platform Module 2.0 Gen10 Option
107