Installing The External Raid Controller Card - VERITAS NetBackup 5230 Hardware Installation Manual

Installing the external RAID controller card

Adding 3U16 storage shelves to an operational NetBackup 5230 Appliance
12
Route the MFBU cable along the side of the chassis towards the rear of the
appliance.
13
Proceed to the next section to install the external RAID PCIe card and to
connect it to the MFBU cable.
See "Installing the external RAID controller card"
This section describes how to install the external controller card.
To install the RAID controller card
1
Put on an ESD wrist strap or take other ESD precautions.
2
Locate PCIe riser assembly 2 slot 1. Riser 2 is located next to the power supply.
Installing the external RAID controller card
on page 58.
58