Adding 3U16 storage shelves to an operational NetBackup 5230 Appliance
Set the air duct aside in a safe location.
■
2
Obtain the DIMMs from the Expansion Storage Kit.
3
Locate the DIMM sockets next to the CPUs on the mainboard.
A blank card is installed in each memory socket that is not used.
4
Install the new DIMM cards in slots A2, B2, C2, D2, E2, F2, G2, and H2 as
follows:
In each slot that requires new memory, remove the blank DIMM card. Open
■
the retaining clips (A) at each end of the socket and remove the blank card.
Installing the additional memory
54