VERITAS NetBackup 5230 Hardware Installation Manual page 91

Adding 2U12 storage shelves to an operational NetBackup 5230 Appliance
Installing the additional Maintenance Free Backup Unit (MFBU)
MFBU case
■
MFBU cable
■
3
Insert the MFBU into the case. Do not damage or twist the wires that are
attached to the MFBU.
4
View the appliance from the front left side.
5
Locate the fan on the left side of the chassis.
6
Remove the air baffle that is located near the fans as needed.
7
Remove the fan on the far left.
8
Attach the MFBU cable to the MFBU. The other end of the cable attaches to
the external RAID card when it is installed.
91