VERITAS 2U12 Hardware Service Procedure

Veritas Appliance
Hardware Service Procedure
Replacing a power supply: Veritas 2U12 Storage Shelf
Document Number: 159
Version: 4.1 (05/04/2020)
Purpose
This document describes the process for replacing a power supply in the Veritas 2U12 Storage Shelf.
Affected appliance models
• 5240 Appliance
• 5250 Appliance
Electrical Safety
The static discharged by human bodies can damage static-sensitive components on the boards.
When installing and maintaining the equipment, observe appropriate electrostatic safety precautions
to prevent personnel injuries or device damage.
When operating a device in an electrostatic sensitive area, you must take electrostatic-discharge
(ESD)-preventive measures. These include wearing ESD-preventive gloves, an ESD-preventive wrist
strap, and ESD-preventive clothes to avoid personnel injury or device damage.
To prevent damage to the device, pay attention to the following during operations:
• Do not touch devices with bare hands because ESD from the human body may damage the
electrostatically sensitive elements on a board.
• When dealing with the server or any of the internal components, wear an ESD-preventive wrist
strap, ESD-preventive gloves, and ESD-preventive suit.
About replacing a Veritas 2U12 Storage Shelf power supply
This section describes how to remove and replace a power supply in a Veritas 2U12 Storage Shelf.
Access the power supplies from the rear of the storage shelf. The power supplies are located on each
side of the shelf as indicated in the diagram below. The power supplies are numbered 0 and 1.
1