Prerequisites For Ipmi Configuration - VERITAS NetBackup 5230 Hardware Installation Manual

Prerequisites for IPMI configuration

Verify the following configuration prerequisites:
Ensure that you have a dedicated network infrastructure. The remote
■
management port is 1 Gbps for NetBackup 5230 appliances.
The remote management port can auto-negotiate its link speed of up to 1 Gbps.
■
Note: If the IPMI is connected to a managed switch port, it is recommended
that you configure the switch port to auto-negotiation.
If a firewall exists between the appliance and the remote devices that manage
■
an appliance (like a laptop computer), open the following ports:
22 SSH
80 HTTP
162 SNMP
443 HTTPS
623 KVM
5120 RMM ISO/CD
5123 RMM floppy
5124 CD
5127 SSL
5900 KVM CLI
7578 RMM CLI
7582 SSL
Note: If you have a private internal network, remember to configure the settings
accordingly in your network address translation (NAT).
The remote management port must be configured as a DHCP or static address.
■
Preparing for hardware installation
Prerequisites for IPMI configuration
19