Adding 2U12 storage shelves to an operational NetBackup 5230 Appliance
Grasp the riser assembly with both hands. With firm even pressure lift it
■
out of the connector on the mainboard.
Slot 1 is on the bottom of the riser. Remove the screw that secures slot 1
■
to the riser assembly.
Remove the metal cover plate from slot 1.
■
4
Remove the RAID controller card from the Expansion Storage Kit.
5
Align the edge connector on the card with the bottom PCIe-card socket (or slot
1). The edge connector is keyed to install one way only.
6
Firmly and evenly insert the card in the socket.
7
Use the screw you removed earlier to secure the RAID controller card in the
PCIe riser assembly.
Installing the external RAID controller card
95