VERITAS 5250 Hardware Service Procedure

Veritas Appliance
Hardware Service Procedure
Removing and replacing a bezel: Veritas appliance
Document Number: 315
Version: 1.0 (05/04/2020)

Purpose

This document describes the process for removing and replacing the bezel for the Veritas 5250
appliance.

Affected appliance models

• 5250 Appliance

Electrical Safety

The static discharged by human bodies can damage static-sensitive components on the boards.
When installing and maintaining the equipment, observe appropriate electrostatic safety precautions
to prevent personnel injuries or device damage.
When operating a device in an electrostatic sensitive area, you must take electrostatic-discharge
(ESD)-preventive measures. These include wearing ESD-preventive gloves, an ESD-preventive wrist
strap, and ESD-preventive clothes to avoid personnel injury or device damage.
To prevent damage to the device, pay attention to the following during operations:
• Do not touch devices with bare hands because ESD from the human body may damage the
electrostatically sensitive elements on a board.
• When dealing with the server or any of the internal components, wear an ESD-preventive wrist
strap, ESD-preventive gloves, and ESD-preventive suit.

About removing the appliance bezel

This document describes how to remove and replace the 5250 Appliance bezel.
This procedure can be accomplished with the appliance installed in the rack.

Requirements

Verify that you have the following items:
1