The Status LED (1) should not be lit. The following indications are possible:
A solid, amber, LED indicates a disk fault.
■
A blinking, amber, LED indicates that a RAID rebuild is in progress.
■
The Activity LED (2) indicates the following:
The LED is not lit when the disk has spun down, although power is on.
■
The LED is solid green when there is no disk activity, although power
■
is on.
The LED blinks green when the disk spins up.
■
The LED blinks green occasionally when commands are processed.
■
Review all LEDs on the front control panel.
■
Number
LED description
1
AC power button with integrated LED
2
Hard drive activity
3
ID button with integrated LED
Verifying hardware operation and configuring IPMI
Turning on the appliance
41