VERITAS NetBackup 5230 Hardware Installation Manual page 94

Adding 2U12 storage shelves to an operational NetBackup 5230 Appliance
To install the RAID controller card
1
Put on an ESD wrist strap or take other ESD precautions.
2
Locate PCIe riser assembly R2 and slot 1. Riser 2 is located next to the power
supply.
3
Remove the PCIe riser assembly as follows.
Disengage the two hooks (1) from the chassis slots (2) that secure the riser
■
2 assembly to the chassis.
Installing the external RAID controller card
94