Adding 3U16 storage shelves to an operational NetBackup 5230 Appliance
Injury to personnel and damage to equipment is very possible. The storage shelf
is heavier than the appliance. Therefore, you must install the storage shelf in the
bottom of the rack. Install the appliance higher in the rack than the storage shelves.
Storage shelf weight and dimensions:
Weight: 32.5 kg (71.7 lbs)
■
Height: 13.1 cm (5.15")
■
Width: 44.7 cm (17.6")
■
Depth: 56.1 cm (22.1")
■
Installing the 3U16 storage shelf rails
The 3U16 storage shelf is shipped with left and right mounting rails. These rails
install in a standard 19-inch rack. The front plates of the rails are marked left and
right. Two-inch lips on the bottoms of the rails provide a shelf on which the storage
system sits. Extenders that are built into the rails let you adjust the rails for the
depth of the rack.
Caution: Due to the weight of the units, Veritas recommends that storage shelves
be installed at or near the bottom of the rack.
Requirements
19-inch equipment rack
■
Available 3U slot
■
Six M5 screws (provided)
■
Six cage nuts (provided)
■
Number 2 Phillips screwdriver
■
Flashlight
■
To install the 3U16 storage shelf guide rails
1
Determine the installation positions of the guide rails in the rack.
Installing 3U16 storage shelves into the rack
64