Leds For Lan Connectors - NEC E120e-M User Manual

Chapter 1 General Description

4.6.5 LEDs for LAN connectors

The three LAN connectors provided at the rear of the server have two LEDs each.
LINK/ACT LED (
This LED indicates the state of the LAN port.
The following table lists LINK/ACT LED patterns and their explanation.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
SPEED LED ( 1,
This LED indicates which network interface is used.
– Two onboard LANs (
– Management LAN (
The following table lists LINK/ACT LED patterns and their explanation.
SPEED LED pattern
On (amber)
On (green)
Off
1, 2, M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
2, M)
1, 2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
M) supports 100BASE-TX and 10BASE-T.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/E120e-M User's Guide
4. Names and Functions of Parts
LINK/ACT
Explanation
Explanation
SPEED
41