Table of Contents
Advertisement
Chapter 1 General Description
4.7.7
LEDs for LAN connectors
The three LAN connectors provided at the rear of the server have two LEDs each.
Management
LAN Connector
LINK/ACT LED (
This LED indicates the state of the LAN port. LINK LED lights green when the server and hub are
powered and properly connected. ACT LED flashes green when the port is transmitting or receiving data.
If the LED does not turn on in LINK state, check the cable or connection.
SPEED LED (
This LED indicates which network interface is used.
Two onboard LANs (
The LED indicates which network interface is being used.
Amber:
Green:
OFF:
Management LAN (
The LED indicates which network interface is being used.
Green:
OFF:
46
LAN1
Connector
LAN2
Connector
1,
2,
M)
1,
2,
M)
1,
2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
Operating with 1000BASE-T
Operating with 100BASE-TX
Operating with 10BASE-T
M) supports 100BASE-TX and 10BASE-T.
Operating with 100BASE-TX
Operating with 10BASE-T
Express5800/T120e User's Guide
LINK/ACT
LED
SPEED
LED
LINK/ACT
LED
SPEED
LED
LINK/ACT
LED
SPEED
LED
4. Names and Functions of Parts
Advertisement
Table of Contents
