Leds For Lan Connectors - NEC Express5800/E120d-1 User Manual

Chapter 1 General Description
4.6.7

LEDs for LAN connectors

The three LAN connectors provided at the rear of the server have two LEDs each.
LINK/ACT
LED

LINK/ACT LED (
This LED indicates the state of the LAN port.
LINK/ACT LED
On (green)
Flashing (green)
Off

SPEED LED (
This LED indicates which network interface is used.
 Two onboard LANs (
 Management LAN (
SPEED LED
On (amber)
On (green)
Off
SPEED
LED
1
2
LAN
connector
1, 2, M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
1, 2, M)
1, 2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
M) supports 100BASE-TX and 10BASE-T.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/E120d-1 User's Guide
SPEED
LINK/ACT
LED
LED
M
Management
LANConnector
Description
Description
4. Names and Functions of Parts
41