Configuring Mac Address Learning; Enabling Snmp Notifications For L2Vpn Pw; Displaying And Maintaining Vpls - HP FlexNetwork 10500 Series Configuration Manual

Configuring MAC address learning

Step
1. Enter system view.
2. Enter VSI view.
3. Enable MAC address learning
for the VSI.

Enabling SNMP notifications for L2VPN PW

This feature enables L2VPN to generate SNMP notifications when PW deletions, PW switchovers, or
PW status changes occur. For L2VPN event notifications to be sent correctly, you must also
configure SNMP on the device. For more information about SNMP configuration, see the network
management and monitoring configuration guide for the device.
To enable SNMP notifications for L2VPN PW:
Step
1. Enter system view.
2. Enable SNMP notifications
for L2VPN PW.

Displaying and maintaining VPLS

Execute display commands in any view and reset commands in user view.
Task
Display LDP PW label information.
(In standalone mode.) Display L2VPN
forwarding information.
(In IRF mode.) Display L2VPN forwarding
information.
Display MAC address table information for
one or all VSIs.
Display L2VPN PW information.
Display PW class information.
Display Ethernet service instance
information.
Display VSI information.
Display information about automatically
discovered VPLS PEs.
Command
system-view
vsi vsi-name
mac-learning enable
Command
system-view
snmp-agent trap enable l2vpn
[ pw-delete | pw-switch |
pw-up-down ] *
Command
display l2vpn ldp [ peer ip-address [ pw-id pw-id | vpls-id
vpls-id ] | vsi vsi-name ] [ verbose ]
display l2vpn forwarding { ac | pw } [ vsi vsi-name ] [ slot
slot-number ] [ verbose ]
display l2vpn forwarding { ac | pw } [ vsi vsi-name ]
[ chassis chassis-number slot slot-number ] [ verbose ]
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ]
[ count | verbose ]
display l2vpn pw [ vsi vsi-name ] [ protocol { bgp | ldp |
static } ] [ verbose ]
display l2vpn pw-class [ class-name ] [ verbose ]
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ]
[ verbose ]
display l2vpn vsi [ name vsi-name ] [ verbose ]
display l2vpn auto-discovery [ peer ip-address ] [ vsi
vsi-name ]
386
Remarks
N/A
N/A
By default, MAC address learning
is enabled for a VSI.
Remarks
N/A
By default, SNMP notifications for
L2VPN PW are disabled.