HP FlexNetwork 10500 Series Configuration Manual page 389

Configuring BGP to advertise VPLS label block information
Step
1. Enter system view.
2. Enable BGP instance and
enter BGP instance view.
3. Configure the remote PE as
a BGP peer.
4. Create the BGP L2VPN
address family and enter
BGP L2VPN address family
view.
5. Enable BGP to exchange
L2VPN information with the
specified peer or peer group.
6. Enable BGP to exchange
label block information with
the specified peer or peer
group.
7. (Optional.) Permit the local
AS number to appear in
routes from the specified
peer or peer group and
specify the appearance
times.
8. (Optional.) Enable route
target-based filtering of
incoming BGP L2VPN
information.
9. (Optional.) Configure the
router as an RR and specify
a peer or peer group as its
client.
10. (Optional.) Enable L2VPN
information reflection
between clients.
11. (Optional.) Configure the
cluster ID of the RR.
12. (Optional.) Configure the
filtering of reflected L2VPN
information.
13. (Optional.) Return to user
view.
14. (Optional.) Soft-reset L2VPN
BGP sessions.
15. (Optional.) Reset L2VPN
BGP sessions.
Command
system-view
bgp as-number [ instance
instance-name ]
[ multi-session-thread ]
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family l2vpn
peer { group-name | ip-address
[ mask-length ] } enable
peer { group-name | ip-address
[ mask-length ] } signaling
peer { group-name | ip-address
[ mask-length ] } allow-as-loop
[ number ]
policy vpn-target
peer { group-name | ip-address
[ mask-length ] } reflect-client
reflect between-clients
reflector cluster-id { cluster-id |
ip-address }
rr-filter ext-comm-list-number
return
refresh bgp [ instance
instance-name ] { ip-address
[ mask-length ] | all | external |
group group-name | internal }
{ export | import } l2vpn
reset bgp [ instance
instance-name ] { as-number |
ip-address [ mask-length ] | all |
external | group group-name |
internal } l2vpn
380
Remarks
N/A
By default, BGP is disabled.
By default, no BGP peers exist.
By default, no BGP L2VPN
address family exists.
By default, BGP cannot exchange
L2VPN information with any peer
or peer group.
By default, BGP can exchange
label block information with a BGP
L2VPN peer or peer group.
By default, the local AS number is
not allowed in routes from a peer
or peer group.
By default, route target-based
filtering of incoming BGP L2VPN
information is enabled.
By default, no RR or client is
configured.
By default, L2VPN information
reflection is enabled between
clients.
By default, an RR uses its own
router ID as the cluster ID.
By default, the RR does not filter
reflected L2VPN information.
N/A
N/A
N/A