HP FlexNetwork 10500 Series Configuration Manual page 178

Hide thumbs Also See for FlexNetwork 10500 Series:
Table of Contents

Advertisement

Step
5.
Enable challenge-response
handshake for the RSVP
neighbor.
6.
Set the idle timeout for the
RSVP security associations
with the RSVP neighbor.
7.
Set the maximum number of
out-of-sequence RSVP
authentication messages
that can be received from the
RSVP neighbor.
To configure RSVP authentication in interface view:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable RSVP authentication
on the interface and
configure the authentication
key.
4.
Enable challenge-response
handshake on the interface.
5.
Set the idle timeout for RSVP
security associations on the
interface.
6.
Set the maximum number of
out-of-sequence RSVP
authentication messages
that can be received on the
interface.
To configure RSVP authentication in RSVP view:
Step
1.
Enter system view.
2.
Enter RSVP view.
3.
Enable RSVP authentication
globally and configure the
authentication key.
4.
Enable challenge-response
handshake globally.
5.
Set the global idle timeout for
RSVP security associations.
Command
authentication challenge
authentication lifetime life-time
authentication window-size
number
Command
system-view
interface interface-type
interface-number
rsvp authentication key { cipher
| plain } string
rsvp authentication challenge
rsvp authentication lifetime
life-time
rsvp authentication
window-size number
Command
system-view
rsvp
authentication key { cipher |
plain } string
authentication challenge
authentication lifetime life-time
169
Remarks
By default, the
challenge-response handshake
feature is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, RSVP authentication
is disabled.
Do not enable both RSVP
authentication and FRR on the
same interface.
By default, the
challenge-response handshake
feature is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, RSVP authentication
is disabled.
By default, the
challenge-response handshake
feature is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).

Advertisement

Table of Contents
loading

Table of Contents