HP FlexNetwork 10500 Series Configuration Manual page 326

Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 10:2::/96
NextHop : ::
Interface : Vlan-int12
Destination: 10:2::2/128
NextHop : ::1
Interface : InLoop0
Destination: 200::/96
NextHop : ::
Interface : NULL0
Destination: FE80::/10
NextHop : ::
Interface : NULL0
Destination: FF00::/8
NextHop : ::
Interface : NULL0
# Execute the display ipv6 routing-table command on CE 1 to verify that CE 1 has not learned
the route to the VPN behind CE 2. (Details not shown.)
# Execute the display ipv6 routing-table vpn-instance command on the PEs. The output
shows the route to the VPN behind the peer CE. This example uses PE 2.
<PE2> display ipv6 routing-table vpn-instance vpn1
Destinations : 7 Routes : 7
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 10:2::/96
NextHop : ::
Interface : Vlan-int12
Destination: 10:2::1/128
NextHop : ::1
Interface : InLoop0
Destination: 100::/96
NextHop : ::FFFF:10.1.1.1
Interface : Vlan-int11
Destination: 200::/96
NextHop : 10:2::2
317
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : BGP4+
Preference: 255
Cost : 0
Protocol : BGP4+
Preference: 255