Ietf Ds-Te Configuration Example - HP FlexNetwork 10500 Series Configuration Manual

Include-Any: 0
Average bitrate: 0 kbps
Path MTU: 1500
RRO number: 12
2.1.1.1/32
2.1.1.2/32
1150
2.2.2.2/32
3.1.1.1/32
3.1.1.2/32
1151
3.3.3.3/32
4.1.1.1/32
4.1.1.2/32
3
4.4.4.4/32
Fast Reroute protection: Ready
FRR inner label: 3

IETF DS-TE configuration example

Network requirements
Switch A, Switch B, Switch C, and Switch D run IS-IS and all of them are Level-2 switches.
Use RSVP-TE to establish an MPLS TE tunnel from Switch A to Switch D to transmit data between
the two IP networks. Traffic of the tunnel belongs to CT 2, and the tunnel needs a bandwidth of 4000
kbps.
The maximum bandwidth of the link that the tunnel traverses is 10000 kbps and the maximum
reservable bandwidth of the link is 10000 kbps. BC 1, BC 2, and BC 3 are 8000 kbps, 5000 kbps, and
2000 kbps.
Figure 40 Network diagram
IP network
Vlan-int10
Switch A
Loop0
Flag: 0x00 (No FRR)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Flag: 0x09 (FRR Avail/Node-Prot)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Flag: 0x00 (No FRR)
Flag: 0x00 (No FRR)
Flag: 0x01 (Global label)
Flag: 0x20 (No FRR/Node-ID)
Bypass tunnel: Tunnel50
Vlan-int1
Loop0
Vlan-int1
Vlan-int2
Switch B
Include-all: 0
Maximum burst: 1000.00 bytes
Class type: CT0
Loop0
Vlan-int3
Vlan-int2
Switch C
148
IP network
Vlan-int10
Switch D
Vlan-int3
Loop0