Page of 20

Advertisement

Data sheet
HP 10500 Switch Series
The HP 10500 Switch Series sets a new benchmark for performance, reliability, and scalability
with next-generation Clos architecture. Designed for enterprise campus core networks, the
10500 Switch Series enables a cloud-connected and rich-media-capable infrastructure. The
switch series provides industry-leading 10GbE/40GbE port density, 3-microsecond latency, and
very low energy consumption.
With HP Intelligent Resilient Framework (IRF) technology, the scalability and resiliency of the
10500 switch series can be extended and virtualized across up to four chassis with a single
management interface—enabling flatter, more agile networks. This switch series, along with
the entire HP FlexNetwork architecture, can be seamlessly managed through the HP Intelligent
Management Center (IMC), which provides a single-pane-of-glass management view of the
infrastructure.
A summary of the highlights of the 10500 Switch Series:
• Advanced, next-generation Clos architecture
• More than 11 terabits-per-second switching capacity
• Feature-rich switch with IPv6 and MPLS functionality
• HP IRF technology virtualizes up to four chassis
• Ultra-high 1/10/40GbE density; 100GbE readiness

Advertisement

   Related Manuals for HP 10500 Series

   Summary of Contents for HP 10500 Series

  • Page 1: Product Overview

    HP 10500 Switch Series Product overview The HP 10500 Switch Series sets a new benchmark for performance, reliability, and scalability with next-generation Clos architecture. Designed for enterprise campus core networks, the 10500 Switch Series enables a cloud-connected and rich-media-capable infrastructure. The switch series provides industry-leading 10GbE/40GbE port density, 3-microsecond latency, and very low energy consumption.

  • Page 2: Features And Benefits

    Product architecture Brings native high stability, independent process monitoring, and restart through the modular design and multiple processes of HP Comware v7 software; allows individual software modules to be upgraded for higher availability; and supports enhanced serviceability functions • In-service software upgrade...

  • Page 3

    Data sheet | HP 10500 Switch Series • Flexible port selection Provides a combination of fiber and copper interface modules, 100/1000BASE-X auto-speed selection, and 10/100/1000BASE-T auto-speed detection as well as auto-duplex and MDI/ MDI-X • Monitor link Collects statistics on performance and errors on physical links, increasing system availability (Comware v5 only) •...

  • Page 4

    Data sheet | HP 10500 Switch Series Resiliency and high availability • Redundant/load-sharing fabrics, management, fan assemblies, and power supplies Increase total performance and power availability, while providing hitless, stateful failovers • All hot-swappable modules Allows replacement of modules without any impact on other modules •...

  • Page 5

    Data sheet | HP 10500 Switch Series Virtual private network (VPN) • IPSec Provides secure tunneling over an untrusted network, such as the Internet or a wireless network; and offers data confidentiality, authenticity, and integrity between two network endpoints • Generic routing encapsulation (GRE) Transports L2 connectivity over an L3 path in a secured way;...

  • Page 6

    Data sheet | HP 10500 Switch Series • Information center Provides a central repository for system and network information; aggregates all logs, traps, and debugging information generated by the system and maintains them in the order of severity; and sends out the network information to multiple channels, based on user-defined rules •...

  • Page 7

    Data sheet | HP 10500 Switch Series L3 services • Address resolution protocol (ARP) Determines the MAC address of another IP host in the same subnet; includes support for static ARPs; a gratuitous ARP allows detection of duplicate IP addresses; and a proxy ARP allows normal ARP operation between subnets or when subnets are separated by an L2 network •...

  • Page 8

    Data sheet | HP 10500 Switch Series • RIP next generation (RIPng) Extends RIPv2 to support IPv6 addressing • OSPFv3 Provides OSPF support for IPv6 • IS-IS for IPv6 Extends IS-IS to support IPv6 addressing • BGP+ Extends BGP-4 to support multiprotocol BGP, including support for IPv6 addressing •...

  • Page 9

    Data sheet | HP 10500 Switch Series • Switch management logon security Helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication • SSHv2 Uses external servers to securely log in to a remote device; protects against IP spoofing and plain-text password interception, with authentication and encryption;...

  • Page 10

    Data sheet | HP 10500 Switch Series Convergence • LLDP- media endpoint discovery Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones • Protocol-independent multicast (PIM) Defines modes of Internet IPv4 and IPv6 multicasting to allow one-to-many and many-to- many transmission of information;...

  • Page 11

    Data sheet | HP 10500 Switch Series • Unified wired-WLAN module Supports up to 1,024 access points per module; can be used with select HP access points (refer to the HP 10500/7500 20G Unified Wired-WLAN Module data sheet for more details); provides N+1, N+N, and 1+1 redundancy with sub-second failovers;...

  • Page 12: Specifications

    Data sheet | HP 10500 Switch Series HP 10500 Switch Series Specifications HP 10504 Switch Chassis (JC613A) HP 10508 Switch Chassis (JC612A) Ports 2 MPU (for management modules) slots 2 MPU (for management modules) slots 4 switch fabric slots 4 switch fabric slots...

  • Page 13

    These modules - JC614A, JD249A, JD252A, and JD254A - are These modules - JC614A, JD249A, JD252A, and JD254A - are only available using Comware v5 for the 10500. Please see an HP only available using Comware v5 for the 10500. Please see an HP representative or technical notes for details.

  • Page 14

    Data sheet | HP 10500 Switch Series HP 10508-V Switch Chassis (JC611A) HP 10512 Switch Chassis (JC748A) Ports 2 MPU (for management modules) slots 2 MPU (for management modules) slots 4 switch fabric slots 4 switch fabric slots 8 I/O module slots...

  • Page 15

    These modules - JC614A, JD249A, JD252A, and JD254A - are These modules - JC614A, JD249A, JD252A, and JD254A - are only available using Comware v5 for the 10500. Please see an HP only available using Comware v5 for the 10500. Please see an HP representative or technical notes for details.

  • Page 16

    Data sheet | HP 10500 Switch Series Standards and Protocols (applies to all products in series) RFC 1771 BGPv4 RFC 1998 PPP Gandalf FZA Compression RFC 2439 BGP Route Flap Damping RFC 2858 BGP-4 Multi-Protocol Extensions Protocol RFC 4272 BGP Security Vulnerabilities...

  • Page 17

    Data sheet | HP 10500 Switch Series IP multicast RFC 2236 IGMPv2 RFC 3446 Anycast Rendezvous Point (RP) RFC 4604 Using Internet Group Management RFC 2283 Multiprotocol Extensions for BGP-4 mechanism using Protocol Independent Protocol Version 3 (IGMPv3) and Multicast...

  • Page 18

    Data sheet | HP 10500 Switch Series Network management IEEE 802.1AB Link Layer Discovery Protocol RFC 1155 Structure of Management RFC 3176 sFlow (LLDP) Information RFC 3412 SNMPv3 Message Processing RFC 1448 Protocol Operations for version 2 RFC 1157 SNMPv1...

  • Page 19

    Data sheet | HP 10500 Switch Series HP 10500 Switch Series accessories Modules HP 10500 Type A Main Processing Unit with Comware v7 Operating System (JG496A) HP 10500 Main Processing Unit (JC614A) HP 10500 48-port 10GbE SFP+ SF Module (JC756A)

  • Page 20

    HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Comments to this Manuals

Symbols: 0
Latest comments: